🚨 CRITICAL GUIDELINES

Windows File Path Requirements

MANDATORY: Always Use Backslashes on Windows for File Paths

When using Edit or Write tools on Windows, you MUST use backslashes (\) in file paths, NOT forward slashes (/).

Examples:

• ❌ WRONG: D:/repos/project/file.tsx
• ✅ CORRECT: D:\repos\project\file.tsx

This applies to:

• Edit tool file_path parameter
• Write tool file_path parameter
• All file operations on Windows systems

Documentation Guidelines

NEVER create new documentation files unless explicitly requested by the user.

• Priority: Update existing README.md files rather than creating new documentation
• Repository cleanliness: Keep repository root clean - only README.md unless user requests otherwise
• Style: Documentation should be concise, direct, and professional - avoid AI-generated tone
• User preference: Only create additional .md files when user specifically asks for documentation

---

Windows Path Troubleshooting for Claude Code

🚨 CRITICAL: Always Use Backslashes on Windows for File Paths

MANDATORY: When using Edit, Write, or Read tools on Windows, you MUST use backslashes (\) in file paths, NOT forward slashes (/).

The Rule

Windows File Path Requirements:

• ✅ CORRECT: D:\repos\project\file.tsx
• ❌ WRONG: D:/repos/project/file.tsx

This applies to:

• Edit tool file_path parameter
• Write tool file_path parameter
• Read tool file_path parameter
• All file operations on Windows systems

Why This Matters

Common error message when using forward slashes on Windows:

Error: ENOENT: no such file or directory

Root cause:

• Windows native file system uses backslashes (\) as path separators
• Forward slashes (/) work in some Windows contexts but NOT in Claude Code file tools
• Git Bash displays paths with forward slashes but Windows APIs require backslashes
• Claude Code's Read/Write/Edit tools use Windows native APIs that expect backslashes

🔍 Common Windows Path Issues in Claude Code

Issue 1: Forward Slashes in Tool Calls

Symptom:

Edit tool fails with "file not found" or "no such file or directory"

Cause:
Using forward slashes copied from Git Bash output:

# Git Bash shows:
/s/repos/claude-plugin-marketplace/file.tsx

Incorrect usage:

Edit(file_path="/s/repos/myproject/file.tsx")

Correct usage:

Edit(file_path="S:\repos\myproject\file.tsx")

Solution steps:

1. Identify the Windows drive letter (e.g., /s/ → S:)
2. Replace forward slashes with backslashes
3. Add drive letter with colon
4. Use absolute Windows path format

Issue 2: Git Bash MINGW Path Format

Symptom:
Paths like /s/repos/ or /c/Users/ don't work in Edit/Write/Read tools

MINGW path format explained:

• Git Bash uses POSIX-style paths on Windows
• Drive letters are represented as /c/, /d/, /s/, etc.
• These are MINGW virtual paths, not Windows paths
• Claude Code tools need Windows-native paths

Conversion table:

Git Bash (MINGW)	Windows Native
/c/Users/name/	C:\Users\name\
/d/repos/project/	D:\repos\project\
/s/work/code/	S:\work\code\
/mnt/c/Windows/	C:\Windows\

Conversion algorithm:

1. Extract drive letter from first path segment (e.g., /s/ → S)
2. Add colon to drive letter (e.g., S → S:)
3. Replace remaining forward slashes with backslashes
4. Combine: S: + \repos\project\file.tsx

Issue 3: Relative Paths in Git Bash

Symptom:
Relative paths from Git Bash don't resolve correctly in Claude Code tools

Cause:
Git Bash current working directory uses MINGW format, but Claude Code tools use Windows format

Example scenario:

# In Git Bash:
pwd
# Shows: /s/repos/my-project

# User provides relative path:
./src/components/Button.tsx

Problem:
Claude Code can't resolve ./src/ from MINGW /s/repos/my-project

Solution:

1. Get the full Windows path from Git Bash:

   pwd -W
   # Shows: S:/repos/my-project (Windows format with forward slashes)
   

2. Convert to proper Windows path: S:\repos\my-project
3. Append relative path with backslashes: S:\repos\my-project\src\components\Button.tsx

Issue 4: Environment Variable Expansion

Symptom:
Paths with environment variables like $HOME or %USERPROFILE% fail

Git Bash environment variables:

echo $HOME
# Shows: /c/Users/username (MINGW format)

Windows environment variables:

echo %USERPROFILE%
# Shows: C:\Users\username (Windows format)

Best practice:

• Avoid environment variables in file paths for Claude Code tools
• Use absolute Windows paths instead
• If user provides $HOME, ask them to run echo $HOME and convert the result

Issue 5: Spaces in File Paths

Symptom:
Paths with spaces break or cause "file not found" errors

Correct handling:

✅ CORRECT: Edit(file_path="C:\Program Files\My App\config.json")
✅ CORRECT: Edit(file_path="D:\My Documents\project\file.txt")

Notes:

• Do NOT add quotes around the path in the parameter
• The tool call itself handles escaping
• Spaces are fine in Windows paths when using backslashes

Issue 6: UNC Network Paths

Symptom:
Network paths like \\server\share\file.txt fail

Windows UNC format:

\\server\share\folder\file.txt

Git Bash representation:

//server/share/folder/file.txt

Correct usage in Claude Code:

Edit(file_path="\\\\server\\share\\folder\\file.txt")

Note: Backslashes must be doubled in some contexts due to escaping, but Claude Code tools handle this automatically.

🔧 Path Detection and Conversion Algorithm

When a user provides a file path, follow this decision tree:

Step 1: Identify Path Format

MINGW Path (Git Bash):

• Starts with / followed by single letter and / (e.g., /c/, /s/)
• Example: /s/repos/project/file.tsx
• Action: Convert to Windows format

Windows Path:

• Starts with drive letter and colon (e.g., C:, D:)
• Uses backslashes or forward slashes
• Example: S:\repos\project\file.tsx or S:/repos/project/file.tsx
• Action: Ensure backslashes are used

Relative Path:

• Starts with ./ or ../ or just filename
• Example: ./src/components/Button.tsx
• Action: Request full path from user or detect current directory

UNC Path:

• Starts with \\ or //
• Example: \\server\share\file.txt
• Action: Ensure backslashes are used

Step 2: Conversion Process

For MINGW paths (/x/...):

Input: /s/repos/myproject/src/components/Button.tsx

Process:
1. Extract drive letter: "s"
2. Uppercase: "S"
3. Add colon: "S:"
4. Replace remaining slashes: \repos\myproject\src\components\Button.tsx
5. Combine: S:\repos\myproject\src\components\Button.tsx

Output: S:\repos\myproject\src\components\Button.tsx

For Windows paths with forward slashes (X:/...):

Input: S:/repos/project/file.tsx

Process:
1. Detect drive letter already present: "S:"
2. Replace forward slashes with backslashes: \repos\project\file.tsx
3. Combine: S:\repos\project\file.tsx

Output: S:\repos\project\file.tsx

For relative paths:

Input: ./src/components/Button.tsx
Current directory (from user or detection): S:\repos\my-project

Process:
1. Remove ./ prefix
2. Replace forward slashes: src\components\Button.tsx
3. Combine with current directory: S:\repos\my-project\src\components\Button.tsx

Output: S:\repos\my-project\src\components\Button.tsx

🛠️ Interactive Path Fixing Workflow

When you encounter a file path error on Windows:

Step 1: Detect the Error

Error indicators:

• "ENOENT: no such file or directory"
• "file not found"
• Edit/Write/Read tool failure
• User mentions "Windows" or "Git Bash"

Step 2: Analyze the Path

Ask yourself:

1. Was the path provided by the user in MINGW format?
2. Does the path use forward slashes?
3. Is it a relative path?
4. Did I receive the path from a Git Bash command output?

Step 3: Request Clarification (If Needed)

If the path is ambiguous, ask:

I see you're working on Windows with Git Bash. To ensure I use the correct path format,
could you run this command and share the output?

pwd -W

This will give me the Windows-formatted path.

Step 4: Convert and Retry

Conversion template:

I'll convert the path from Git Bash format to Windows format:
- Git Bash: /s/repos/project/file.tsx
- Windows: S:\repos\project\file.tsx

Retrying with the correct Windows path...

Step 5: Verify Success

After conversion, verify the operation succeeded and explain what was fixed:

✅ Successfully edited the file using the Windows path format (S:\repos\...).

Note: On Windows with Git Bash, always use backslashes (\) in file paths for
Claude Code's Edit/Write/Read tools, even though Git Bash displays paths with
forward slashes (/).

📋 Troubleshooting Checklist

When file operations fail on Windows:

• [ ] Check path separator: Are backslashes (\) used instead of forward slashes (/)?
• [ ] Check drive letter format: Is it C: not /c/?
• [ ] Check MINGW conversion: Did you convert /x/path to X:\path?
• [ ] Check relative vs absolute: Is the path absolute starting with drive letter?
• [ ] Check environment variables: Did you expand $HOME or %USERPROFILE%?
• [ ] Check spaces: Are spaces in the path handled correctly?
• [ ] Check UNC paths: Are network paths using \\server\share format?
• [ ] Check file existence: Does the file actually exist at that path?

🎯 Quick Reference: Path Conversion Examples

Context	Path Format	Claude Code Tool Format
Git Bash pwd	/s/repos/project	S:\repos\project
Git Bash relative	./src/file.tsx	S:\repos\project\src\file.tsx
Windows Explorer	S:\repos\project\file.tsx	S:\repos\project\file.tsx ✅
Windows with /	S:/repos/project/file.tsx	S:\repos\project\file.tsx
MINGW full path	/c/Users/name/file.txt	C:\Users\name\file.txt
Network share (Git Bash)	//server/share/file.txt	\\server\share\file.txt
WSL path	/mnt/c/repos/project	C:\repos\project

🚀 Best Practices for Windows File Operations

1. Always Convert Paths Proactively

Don't wait for errors - If you see a path that looks like MINGW format, convert it immediately:

User provides: /s/repos/project/file.tsx
You think: "This is MINGW format, I need to convert it to S:\repos\project\file.tsx"
You do: Convert before calling Edit/Write/Read tool

2. Use pwd -W in Git Bash

When you need current directory on Windows:

# Instead of:
pwd                    # Shows: /s/repos/project (MINGW format)

# Use:
pwd -W                 # Shows: S:/repos/project (Windows format with /)

Then convert the forward slashes to backslashes.

3. Communicate Path Format Changes

Always explain when you convert paths:

I'll convert the Git Bash path to Windows format for the Edit tool:
- From: /s/repos/project/file.tsx
- To: S:\repos\project\file.tsx

This helps users understand the requirement and learn for future interactions.

4. Validate Before Tool Use

Before calling Edit/Write/Read tools on Windows:

Pre-flight checklist:
✅ Path starts with drive letter and colon (e.g., C:, S:)
✅ Path uses backslashes (\) not forward slashes (/)
✅ Path is absolute, not relative
✅ No MINGW format (no /c/, /s/, etc.)

5. Handle User-Provided Paths Carefully

User might provide paths in various formats:

• Copy-pasted from Git Bash (MINGW format)
• Copy-pasted from Windows Explorer (Windows format)
• Typed manually (could be either)
• From command output (varies by tool)

Always detect and convert as needed.

🐛 Common Error Messages and Solutions

Error: "ENOENT: no such file or directory"

Most likely cause: Forward slashes instead of backslashes

Solution:

1. Check if path uses forward slashes
2. Convert to backslashes
3. Verify drive letter format
4. Retry operation

Error: "Invalid file path"

Most likely cause: MINGW path format

Solution:

1. Detect /x/ pattern at start
2. Convert to X: format
3. Replace all forward slashes with backslashes
4. Retry operation

Error: "Access denied" or "Permission denied"

Most likely cause: Path is correct but permissions issue

Solution:

1. Verify file exists and is accessible
2. Check if file is locked by another process
3. Verify user has read/write permissions
4. Consider running Git Bash as administrator

Error: "File not found" but path looks correct

Possible causes:

1. Path has hidden characters (copy-paste issue)
2. File extension is hidden in Windows
3. Path has trailing spaces
4. Case sensitivity (some tools are case-sensitive)

Solution:

1. Ask user to run ls -la in Git Bash to verify exact filename
2. Check for file extensions
3. Trim whitespace from path
4. Match exact case of filename

📚 Platform-Specific Knowledge

Windows File System Characteristics

Path characteristics:

• Drive letters: A-Z (typically C: for system, D-Z for additional drives)
• Path separator: Backslash (\)
• Case insensitive: File.txt same as file.txt
• Special characters: Avoid < > : " | ? * in filenames
• Maximum path length: 260 characters (legacy limit, can be increased)

Git Bash on Windows

Git Bash is a POSIX-compatible environment:

• Uses MINGW (Minimalist GNU for Windows)
• Translates POSIX paths to Windows paths internally
• Commands like ls, pwd, cd use POSIX format
• Native Windows programs need Windows format paths

Key insight: Git Bash displays and accepts POSIX paths, but Windows APIs (used by Claude Code) require Windows paths.

WSL (Windows Subsystem for Linux)

WSL path mounting:

• Windows drives mounted at /mnt/c/, /mnt/d/, etc.
• WSL path: /mnt/c/Users/name/project
• Windows path: C:\Users\name\project

Conversion:

1. Replace /mnt/x/ with X:
2. Replace forward slashes with backslashes

🎓 Teaching Users

When explaining path issues to users, use this template:

I encountered a path format issue. Here's what happened:

**The Problem:**
Claude Code's file tools (Edit, Write, Read) on Windows require paths in Windows
native format with backslashes (\), but Git Bash displays paths in POSIX format
with forward slashes (/).

**The Path Formats:**
- Git Bash shows: /s/repos/project/file.tsx
- Windows needs: S:\repos\project\file.tsx

**The Solution:**
I've converted your path to Windows format. For future reference, when working
with Claude Code on Windows with Git Bash:
1. Use backslashes (\) in file paths
2. Use drive letter format (C:, D:, S:) not MINGW format (/c/, /d/, /s/)
3. Run `pwd -W` in Git Bash to get Windows-formatted paths

**The Fix:**
✅ Now using: S:\repos\project\file.tsx

🔍 Advanced Scenarios

Scenario 1: Mixed Path Contexts

User is working with both WSL and Git Bash:

• Ask which environment they're in
• Use appropriate conversion
• Document the choice

Scenario 2: Symbolic Links

Windows symbolic links:

mklink /D C:\link C:\target

Handling:

• Follow the link to actual path
• Use actual path in tool calls
• Inform user if link resolution needed

Scenario 3: Docker Volumes

Docker volume mounts on Windows:

docker run -v C:\repos:/app

Path translation:

• Outside container: C:\repos\file.txt
• Inside container: /app/file.txt
• Use context-appropriate format

✅ Success Criteria

You've successfully handled Windows paths when:

1. ✅ All Edit/Write/Read tool calls use backslashes on Windows
2. ✅ MINGW paths are converted before tool use
3. ✅ Relative paths are resolved to absolute Windows paths
4. ✅ User understands why conversion was necessary
5. ✅ File operations succeed without path-related errors
6. ✅ Path format is consistent throughout the session

🆘 When to Use This Skill

PROACTIVELY apply this knowledge when:

1. User mentions they're on Windows
2. User mentions Git Bash or MINGW
3. You see paths starting with /c/, /s/, etc.
4. Edit/Write/Read tool fails with "file not found"
5. User provides paths with forward slashes on Windows
6. You need to read/edit/write files on Windows system

This skill is CRITICAL for Windows users - Path format errors are the #1 cause of file operation failures on Windows with Git Bash.